IC STM32 STM32F103C8T6 LQFP48 ARM Based Microcontroller MCU STM32

Rp25.000

40 in stock

SKU: icstm32f1 Category:

Description

ARM 32-bit CortexTM-M3 CPU ­ 72 MHz, 90 DMIPS with 1.25 DMIPS/MHz
Features
Core: ARM 32-bit CortexTM-M3 CPU ­ 72 MHz, 90 DMIPS with 1.25 DMIPS/MHz
Single-cycle multiplication and hardware division ­ Nested interrupt controller with 43 maskable interrupt
channels ­ Interrupt processing (down to 6 CPU cycles) with tail chaining
Debug mode ­ Serial wire debug (SWD) & JTAG interfaces to 80 fast I/O ports 32/49/80 5 V-tolerant I/Os ­ All mappable on 16 external interrupt vectors ­ Atomic read/modify/write operations
Memories ­ 32-to-128 Kbytes of Flash memory ­ 6-to-20 Kbytes of SRAM
Clock, reset and supply management 3.6 V application supply and I/Os ­ POR, PDR, and programmable voltage detector (PVD) ­ 4-to-16 MHz quartz oscillator ­ Internal 8 MHz factory-trimmed RC ­ Internal 32 kHz RC ­ PLL for CPU clock ­ Dedicated 32 kHz oscillator for RTC with calibration

to 7 timers Up to three 16-bit timers, each with to 4 IC/OC/PWM or pulse counter 16-bit, 6-channel advanced control timer: to 6 channels for PWM output Dead time generation and emergency stop x 16-bit watchdog timers (Independent and Window) ­ SysTick timer: a 24-bit downcounter

Low power ­ Sleep, Stop and Standby modes ­ VBAT supply for RTC and backup registers
to 9 communication interfaces x I2C interfaces (SMBus/PMBus) to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control) to 2 SPIs (18 Mbit/s) ­ CAN interface (2.0B Active) ­ USB 2.0 full speed interface

DMA ­ 7-channel DMA controller ­ Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.

Additional information

Weight 5 g

Reviews

There are no reviews yet.

Be the first to review “IC STM32 STM32F103C8T6 LQFP48 ARM Based Microcontroller MCU STM32”

Your email address will not be published. Required fields are marked *